Hand Stitched Coco Classic Collar in Mustard Yellow, pink painted edge & Red stitch
The Coco Classic hand stitched range of traditionally designed collars come with the addition of a hand stitched finish available in a selection of different thread colours, enabling you to personalise your collar with your choice of leather and stitch colour combination. (If you want a specific thread colour not shown please let me know and we’ll try our best to accommodate you).
Handmade in our workshop, this collar has been hand cut from one of the finest full grain, vegetable tanned leather from Walpier. This is matched up with an equally premium British made, solid brass or nickel-plated brass roller buckle, rivets and D ring. Cast solid brass is resistant to rust and very strong ensuring the safety of even the most wilful four legged friend.
The collar is then stitched using strong, bonded nylon thread, to give the collar a sophisticated and stylish look.
The collar will evolve over time with wear as the dog’s oils are absorbed into the leather creating a beautiful and unique patina, an ongoing record of your adventures in a way.
Please note, leather is a natural product so there may be small variations in colour and markings.
Check the classic collar size guide to find the perfect fit for your dog.
- All products are handmade from start to finish in our seaside workshop
- Everything is made from the finest 100% vegetable tanned, full grain leather
- Edge bevelled and burnished by hand for a smooth, rounded edge offering extra comfort
- Cast solid brass or nickel plated brass hardware that’s rust resistant
- Hand riveted
- Hand stitched
All our products are made from the finest vegetable tanned, full grain, leather ensuring you enjoy a lifetime together.
Our leathers will naturally evolve over time with a gorgeous patina effect as different oils and life are absorbed. That said, if you do need to clean it, please follow the below guidelines to ensure a long lasting product.
- If you get the leather wet, let it dry naturally. Don’t put it on a radiator.
- Before drying, wipe with a damp cloth to clean off any dirt.
- Once dry, ideally apply either Neats foot oil or a leather cream in small circles using a soft cotton cloth.
- Leave to dry and remove any excess residue.
- This process can also be used to help remove or reduce any unwanted scratches or wear from the leather.
- Always remove the collar before applying flea treatments as these products can damage the leather and/or paint finish when wet
Please note, leather is a natural product and when dyed, some colours can leech if they become wet. It rarely happens, however, if any, most likely with the red leather. Although the dye is totally harmless, if you have a white or light coloured dog that enjoys splashing in water it may stain their fur initially. Please call me if you would like further information.
Collar Size Guide
One of the benefits of having a handmade collar is that every collar we make is tailored to fit your dog’s neck perfectly, with a little room either side to tighten or loosen giving you options if needed.
To measure your collar size either use an existing collar you’re happy with or simply use a tape measure, wrap it around the dog’s neck as shown in the picture. Measurements run from the butt of the collar (The buckle end not including the buckle itself) to the holes the other end. The middle hole should be the one ideally used.
Here are some typical collar sizes by breed:
EXTRA SMALL
Neck: 7.5"- 10.5" (19-26cm)
Common breeds: Chihuahua, Toy Poodle, Jack Russell
Recommended collar: 16mm
SMALL
Neck: 9"-12" (22-30cm)
Common breeds: Beagle, Cocker Spaniel, Pug, Mini Dachshund
Recommended collar: 16mm or 22mm width
MEDIUM
Neck: 13-16" (32-39cm)
Common breeds: Dalmatian, Springer Spaniel, Collie, Dachshund
Recommended collar: 22mm or 29mm width
LARGE
Neck: 16-20" (40-50cm)
Common breeds: Boxer, German Shepherd, Labradoodle, Labrador
Recommended collar: 29mm or 38mm width
EXTRA LARGE
Neck: 21-25" (52-62cm)
Common breeds: Newfoundland, Rottweiler, Bull Mastiff, Great Dane
Recommended collar: 29mm or 38mm width
Measuring for a classic dog collar
Step 1
Get your dog to stand still is often the hardest challenge! Then using a piece of tape, string or anything really, wrap it around the middle of the dog’s neck so it’s touching the fur but not pulled really tight. Please use our illustration for if you’re unsure.
Step 2
Now compare your measurements to the standard sizes we make. All collars come with 3 or 5 holes, the middle hole being the one you should ideally use. If your dog’s neck doesn’t quite fit with our standard sizes please let us know and we can make a bespoke collar to your exact needs. Let us know by dropping us a note to bespoke@CocoandBlu.co.uk
Please be aware, all dogs vary in size even from the same breed to the above guide is not a guarantee on size. If possible, always measure your dog before ordering.
