Coco Classic Lead in Petrol Blue
Handmade in our workshop, this lead has been hand cut from one of the finest full grain, 100% vegetable tanned leather from Walpier. This is matched up with an equally premium British made, solid brass or nickel-plated brass trigger clip, rivets and D ring. Solid brass is resistant to rust and very strong ensuring the safety of even the most wilful four legged friend.
The leather will evolve over time with wear as the dog oils, outdoors and life are absorbed, creating a beautiful and unique patina.
Please note, leather is a natural product so there may be small variations in colour and markings.
Sizing
Our leads come in a choice of either 16mm or 20mm wide leather. All leads are approximately 110cm long (40 inches). If you require a different length, please drop us a note at Bespoke@CocoandBlu.co.uk with details of what you would like.
- All products are handmade from start to finish in our seaside workshop
- Everything is made from the finest 100% vegetable tanned, full grain leather
- Bevelled and burnished by hand for a smooth, rounded edge offering extra comfort
- Cast solid brass or nickel-plated brass hardware, with a choice of warm brass or a silvery nickel finish
- Hand riveted
Solid brass or nickel-plated brass: which hardware should you choose?
Both options have a brass base, but their surfaces look different and need different care. Choose by the colour you prefer and how you feel about changes in appearance with use, rather than expecting either finish to stay unchanged forever.
Solid brass: warm colour and natural character
Solid brass means the metal is brass throughout, not simply a brass-coloured coating over a different metal. Brass is an alloy of copper and zinc. Its warm, golden colour comes from the material itself.
Exposed, unlacquered brass can darken and develop a patina as it reacts with air, moisture and handling. That change may be uneven, reflecting where the hardware is touched or rubbed. A protective coating can change how brass ages, so the words âsolid brassâ alone do not tell you whether a piece is lacquered or how quickly its appearance will change.
Choose solid brass if you prefer a warm metallic colour and are comfortable with a finish that may develop character over time. Wear into the brass itself reveals more brass rather than a differently coloured base metal.
Nickel-plated brass: a silvery surface over brass
Nickel-plated brass means a layer of nickel is applied over a brass base. It is not solid nickel, and it is not brass plating over steel. The nickel provides the visible, silvery finish.
The plating separates the brass underneath from the exposed surface while it remains intact. Scratches, rubbing and abrasive cleaning can damage or wear through plating; if the brass beneath becomes exposed, warmer-coloured areas may show. Polishing is not a way to replace a worn nickel layer.
Choose nickel-plated brass if you prefer a silvery look. Treat the plated surface gently rather than trying to polish it like bare brass. We do not promise that its colour will remain unchanged or that it will outlast solid brass.
Does brass rust?
Rust is the corrosion associated with iron and steel. Brass itself does not rust in that sense, but it can tarnish or corrode. Nickel plating does not make hardware immune to wear or damage. âRust resistantâ should not be read as maintenance-free or suitable for leaving wet.
Everyday cleaning and care
Start with a soft, dry cloth. If needed, gently wipe the metal with a soft cloth lightly dampened with water and a little mild soap, then remove any soap residue and dry thoroughly. Keep cleaning local to the hardware rather than soaking the attached leather.
For nickel-plated brass, avoid brass polish, abrasive metal polishes, scouring pads and harsh or acidic cleaners: these can damage the surface layer.
For solid brass, gentle cleaning need not remove the patina. If you want a brighter finish, check the specific hardwareâs coating and care requirements with us before using a brass polish. Polishing removes tarnish and some surface metal, and is not appropriate for every finish. Do not assume a cleaner suitable for bare brass is suitable for plating or a protective coating.
What about sensitivity and lifespan?
Nickel-plated brass has nickel at its surface. Neither option is described here as hypoallergenic, nickel-free or guaranteed suitable for a particular sensitivity. If material sensitivity is a concern, contact us before ordering so we can check the specific hardware details; the finish name alone is not a safety assurance.
We do not give a fixed lifespan or claim that one finish always lasts longer. Appearance and wear depend on the specific finish, use, exposure and care. If you are unsure which option suits you, contact us before choosing.
Sources for this guide
These sources explain general material behaviour and care, not testing or certification of our individual products: Iver: solid brass and rust; Armac Martin: brass finishes and care; Mi & Gei: nickel plating and care; Canadian Conservation Institute: cleaning versus polishing brass; Canadian Conservation Institute: caring for metal objects and plating.
All our products are made from the finest vegetable tanned, full grain, leather ensuring you enjoy a lifetime together.
Our leathers will naturally evolve over time with a gorgeous patina effect as different oils and life are absorbed. That said, if you do need to clean it, please follow the below guidelines to ensure a long lasting product.
- If you get the leather wet, let it dry naturally. Donât put it on a radiator.
- Before drying, wipe with a damp cloth to clean off any dirt.
- Once dry, ideally apply either Neats foot oil or a leather cream in small circles using a soft cotton cloth.
- Leave to dry and remove any excess residue.
- This process can also be used to help remove or reduce any unwanted scratches or wear from the leather.
- Always remove the collar before applying flea treatments as these products can damage the leather and/or paint finish when wet
Please note, leather is a natural product and when dyed, some colours can leech if they become wet. It rarely happens, however, if any, most likely with the red and orange leather. Although the dye is totally harmless, if you have a white or light coloured dog that enjoys splashing in water it may stain their fur initially. Please call me if you would like further information. Â
Also, if your dog pulls hard on the collar after swimming or getting the leather very wet, it is more likely to stretch as the leather will lose its suppleness and elasticity. Â

